Chamber Filter Press

Chamber Filter Press is the type of filter press that uses only chamber filter plates, no membrane (diaphragm) squeezing plates. It relies on the pressure from the feeding pump to achieve filtration. This type of filter press presents the best filtration solution for noncompressible materials that can be easily filtrated, such as mineral concentrates, and for water treatment in sand washing plants, concrete stations, etc.. 

Our automatic chamber filter press use computer processor, PLC and touch screen to control every part's operation, such as cylinder, plate shifter, cloth washing, etc.. It also reserves a remote control access port and can realize remote &automatic operation.

with extended oil cylinder, working zone and upgraded mechanic plate shifters, it can discharge several cakes each time. Its main features are high efficiency, reliable performance, low running cost, etc..

The quick-opening system can increase cake discharging efficiency by 3 to 6 times, making it especially suitable for filter press with large number of plates and requesting frequent operations.

Working principle of Chamber Filter Press:

1. Slurry is pumped into the filter press. The solids are distributed evenly on the filter cloths during the feed (fill) cycle.
2. Solids begin to build on the filter cloth, trapping the ensuing particles and building a filter cake. The filter cake acts as a depth filter for solid/liquid separation. Filtrate exits the plates through the corner ports into the manifold.
3. When the correct valves in the manifold are open, the filtrate exits the press through the filtrate outlet. As the filter press feed pump builds pressure, the solids build within the chambers until they are completely full of filter cake.
4. Once the chambers are full, the fill cycle is complete and the filter press is ready to be emptied.

Standard Models &Technical Data: